Generac 5500EXL User Manual download pdf (Page 5)

Generac Portable Products 5500EXL Extended Life Generator

Your generator requires some assembly and is ready

for use after it has been properly serviced with the

recommended oil and fuel.

If you have any problems with the assembly of

your generator, please call the generator helpline

at 1-800-270-1408.

IMPORTANT: Any attempt to run the unit before it has

been serviced with the recommended oil will result in

an engine failure.

REMOVE GENERATOR

FROM CARTON

 Set the carton on a rigid flat surface with This Side

Up arrows pointing upward.

 Carefully open the top flaps of the shipping carton

(review Cold Weather Operation on page 8).

 Cut down corners at one end of carton from top to

bottom and lay that side of carton down flat.

 Remove all packing material, carton fillers, etc.

 Remove the generator from the shipping carton.

CARTON CONTENTS

Check all contents. If any parts are missing or

damaged, call the generator helpline at

1-800-270-1408.

 The generator

 Electric start battery cables

 Generator and engine owners manuals

 Locking 20 Amp and 30 Amp plugs

 Battery charge cables

 Battery tray mounting bracket/hardware

 Spare spark plug and air filter element

 Spark plug wrench

INSTALLING TRAY AND

BATTERY

You must purchase and install a 12 Volt DC battery

(Series U1-109). The battery should be serviced with

electrolyte fluid and fully charged prior to installation.

Install the battery as follows:

 Find battery tray and fasteners (loose) in carton.

Includes all parts needed to mount battery and tray.

 Remove the 4 battery tray screws from cradle.

 Position the battery tray and install (Figure 2).

 Set battery onto tray (Figure 3).

Figure 3  Install Battery onto Battery Tray

Figure 2  Install Battery Tray

1 2 3 4 5 6 7 8 9 10 ... 19 20

Comments to this Manuals

No comments

Generac 5500EXL User Manual Page 5

Comments to this Manuals

Related products and manuals for Generators Generac 5500EXL