Generac Gn - 360 User Manual Page 1

Manual No. A8927Revision 0 (11/16/98) Printed in U.S.A.GENERAC®ENGINESOverhead ValveIndustrialOwner’s ManualModel No. GN - 320/360/410 (11/13/15 Horse

Generac GN-320/360/410 Engine— 10 —Figure 9 — Removing Heat ShieldSERVICE AND ADJUSTMENTSENGINE SPEEDCAUTION: The engine speed was properly adjusted a

3. Loosen the rocker arm jam nut. Using an allen wrench to turnthe pivot ball stud, check the clearance between the rockerarm and the valve stem with

GGeenneerraacc GGNN--332200//336600//441100 EEnnggiinnee— 12 —RETORQUING THE HEAD BOLTSAfter the first 50 hours of operation, retorque the head bolt

GGeenneerraacc GGNN--332200//336600//441100 EEnnggiinnee— 13 —STORAGE INSTRUCTIONSThis engine should be started at least once a week and run for atl

— 14 —Generac GN-320/360/410 EngineEEXXPPLLOODDEEDD VVIIEEWW —— LLOONNGG BBLLOOCCKK ((GGNN--332200//336600//441100))10C21A21B3C4C

— 15 —GGeenneerraacc GGNN--332200//336600//441100 EEnnggiinneeRREEPPAAIIRR PPAARRTTSS LLIISSTT —— LLOONNGG BBLLOOCCKK ((GGNN--332200//336600//

— 16 —GGeenneerraacc GGNN--332200//336600//441100 EEnnggiinneeEEXXPPLLOODDEEDD VVIIEEWW —— AAIIRR CCLLEEAANNEERR AANNDD CCAARRBBUURREETTOORR43

— 17 —GGeenneerraacc GGNN--332200//336600//441100 EEnnggiinneeAAIIRR CCLLEEAANNEERR AANNDD CCAARRBBUURREETTOORRITEM DESCRIPTION PART NO. QTY. ITE

— 18 —GGeenneerraacc GGNN--332200//336600//441100 EEnnggiinneeEEXXPPLLOODDEEDD VVIIEEWW —— GGAASS TTAANNKK MMOOUUNNTTIINNGG HHAARRDDWWAARREEIT

— 19 —GGeenneerraacc GGNN--332200//336600//441100 EEnnggiinneeEEXXPPLLOODDEEDD VVIIEEWW —— OOIILL FFIILLTTEERR AANNDD OOPPTTIIOONNAALL OOIILL

GGeenneerraacc GGNN--332200//336600//441100 EEnnggiinnee— 2 —If you don’t understand any portion of this manual, contactGenerac for a demonstration

— 20 —GGeenneerraacc GGNN--332200//336600//441100 EEnnggiinneeEEXXPPLLOODDEEDD VVIIEEWW —— LLOOWW OOIILL SSHHUUTTDDOOWWNN AANNDD GGOOVVEERRNNO

ITEM PART # QTY. DESCRIPTION81 67890 1 M20 Hex Nut82 88433 1 Top Wrapper83 45756 7 M6 X 10 Taptite84 78609 2 Cover Bolts85 73104B 1 Air Box Cover86 92

GGeenneerraacc GGNN--332200//336600//441100 EEnnggiinneeCALIFORNIA EMISSION CONTROL WARRANTY STATEMENTYOUR WARRANTY RIGHTS AND OBLIGATIONSThe Califo

GGeenneerraacc GGNN--332200//336600//441100 EEnnggiinnee— 23 —EMISSION CONTROL SYSTEM WARRANTYEmission Control System Warranty ("ECS Warranty&q

GGeenneerraacc GGNN--332200//336600//441100 EEnnggiinneeGENERAC POWER SYSTEMS, INC.TWO YEAR LIMITED WARRANTY FOR “GN” ENGINESGenerac Power Systems,

GGeenneerraacc GGNN--332200//336600//441100 EEnnggiinnee— 3 —• Do not overfill the fuel tank. Always allow room for fuel expansion. If the tank is o

GGeenneerraacc GGNN--332200//336600//441100 EEnnggiinnee— 4 —When ordering engine components, you must provide the authorized service dealer with th

— 5 —GGeenneerraacc GGNN-- 332200//336600//441100 EEnnggiinneeOIL AND FUEL INFORMATIONNOTE: BE SURE TO READ THESE INSTRUCTIONS CAREFULLY BEFORE ATT

GGeenneerraacc GGNN--332200//336600//441100 EEnnggiinnee— 6 —OPERATION AND MAINTENANCEIt is the owner’s/operator's responsibility to perform al

A If the engine FAILS TO START, go to Step 3.B. If the engine STARTS, go to Step 4.Figure 4 — Recoil Handle3. Move the choke lever to the HALF CHOKE P

GGeenneerraacc GGNN--332200//336600//441100 EEnnggiinnee— 8 —GENERAL MAINTENANCE RECOMMENDATIONSThe owner/operator is responsible for making sure th

GGeenneerraacc GGNN--332200//336600//441100 EEnnggiinnee— 9 —CAUTION: Never run this equipment without the completeair cleaner system installed on t